The Relationship between CE Certificate And EN ISO 12100:2010

  You may heard of CE Certificate,But ,do you really know how to describe what is a CE Certificate? What is its Purpose? And its Relationship with EN ISO 12100:2010?

Ⅰ.What is a CE Certificate and what is its purpose?

The term "CE Certificate" can be ambiguous and generally refers to one of two documents, depending on the context.

l EU Declaration of Conformity (EU DoC is the core legal document. It is a formal statement issued and signed by the manufacturer (or their authorized representative in the EU) declaring that their product meets all the relevant health, safety, environmental, and consumer protection requirements set by European Union directives and regulations. Issuing this declaration is a legal requirement for placing a product on the market in the European Economic Area (EEA). 

Eg. EU declaration of conformity about Bo Hui’s product.

l Test Report or Compliance Certificate: This is a document issued by a testing laboratory. It provides technical evidence, such as test results and assessments, demonstrating that the product complies with specific European standards. While the manufacturer can issue a DoC based on their own testing, for higher-risk products, this report must be issued by an independent third party. 

The primary purpose of the CE

CE marking and its associated documentation is to serve as a "passport" for products. By affixing the CE mark and holding the required documents, a manufacturer can sell their product freely throughout the EEA. It signifies compliance with EU law, rather than being a general quality mark.

l CE marking process

The process to obtain the right to affix the CE marking involves several steps:

1.Identify applicable EU Directives and Standards: Determine which EU laws and corresponding European (EN) standards apply to the product.

2.Perform a Conformity Assessment: This involves checking the product against the requirements of the relevant directives and standards. The manufacturer can perform this assessment themselves for lower-risk products.

3.Involve a Notified Body (if required): For higher-risk products (such as medical devices or machinery with significant hazards), the involvement of an EU-appointed Notified Body (NB) is mandatory. The NB performs independent checks, testing, and factory audits.

4.Compile Technical Documentation: Create a comprehensive technical file containing design drawings, risk assessments, test reports, and the bill of materials. This file must be kept for 10 years after the product is placed on the market.

5.Issue the EU Declaration of Conformity and Affix the CE Mark: Once all steps are successfully completed, the manufacturer issues the EU DoC and affixes the CE marking to the product.

Ⅱ.Relationship between CE Certificate and EN ISO 12100:2010

EN ISO 12100:2010 is a specific standard that plays a critical role in the CE marking process for machinery.

l EN ISO 12100:2010 is the Standard: Its full title is "Safety of machinery - General principles for design - Risk assessment and risk reduction." It provides a framework and methodology for manufacturers to identify hazards, assess risks, and implement safety measures (like guards or safety functions) throughout the machine's lifecycle.

l CE Marking is the Goal: To CE mark a machine, the manufacturer must demonstrate compliance with the essential health and safety requirements of the EU Machinery Directive (2006/42/EC).

l The Connection: By designing a machine in accordance with EN ISO 12100:2010, the manufacturer is presumed to have met the fundamental safety objectives of the Machinery Directive. Therefore, compliance with this standard is a primary means of proving that the machine is safe and eligible for the CE mark. The evidence of this compliance (such as a risk assessment report based on the standard) becomes a crucial part of the Technical Documentation and supports the issuance of the EU Declaration of Conformity.

Most of BOHUI’s products have gained CE certification for its preparing to step into EU market.

Eg:H401

H401 tripod Chain Pipe Vise is commonly used in plumbing, pipe fitting, and industrial maintenance. It is designed to securely hold pipes of various diameters during cutting, threading, bending, or welding operations.

 Main structure of the tripod chain:

1.Tripod Base: The three-legged stand provides a stable foundation, allowing the vise to be used on uneven or soft ground without tipping. The legs are often adjustable in height and can be folded for portability.

2.Chain Mechanism: A heavy-duty chain wraps around the pipe, distributing pressure evenly to prevent deformation. This chain is connected to a tightening mechanism (usually a screw or lever) that allows the user to secure the pipe firmly.

3.Vise Head: The head of the vise is mounted on the tripod and houses the chain mechanism. It often includes a swivel base, allowing the pipe to be rotated for easier access during work.

Adjustable Jaws: Some models feature replaceable or adjustable jaws to accommodate different pipe sizes and shapes, ensuring a secure grip on both round and irregularly shaped pipes.

Major features of the product:

1.Secure Pipe Holding: The primary function is to grip and hold pipes firmly in place. It utilizes a chain mechanism that wraps around the pipe, distributing pressure evenly to prevent deformation or slippage, which is crucial when working with round or irregularly shaped pipes.

2.Adjustable Capacity: As indicated by the common specifications for this type of tool (often ranging from 1/8" to 6" diameter), it can accommodate a wide variety of pipe sizes, making it versatile for different job requirements.

3.Stable Support Structure: The three-legged tripod base provides a stable platform, allowing the vise to be used on uneven surfaces or as a standalone workstation without requiring a fixed bench. The legs are often height-adjustable to level the unit on sloped ground.

You may also wonder what are the applications of this product?Let me tell you .

1.Pipe Threading (Tapping): Holding the pipe steady while making threads on the pipe.it usually made together with the threading machine.

2.Pipe Cutting: Securing the pipe for use with manual or power cutters.It usually made together with the cutting machine.

3.Bending: Acting as an anchor point for manual pipe benders.It usally made together with the bending machine.

4.Welding/Fabrication: Holding sections of pipe in alignment for welding or assembly.

"BOHUI's H401 product has undergone rigorous inspections of appearance, dimensions, functionality, and load-bearing capacity before leaving the factory. This product has applied for CE certification and has received affirmation from users for its high quality.